Home
»
General
»
Code 400 response to Register method
TekSIP - General issues
28.12.2009 22:59:25
CanSipUser
Posts: 3
|
Hi,
I installed TekSIP but my Cisco spa2102 wouldnt register. I sniffed the network traffic and discovered it was sending a code 400 (0 bindings) error response to the registration request from my ATA. I then looked at the log and observed the exchange below.
28/12/2009 10:40:47 AM - TekSIP Service 2.3.0.0 (Revision 0) is being started on : 66.38.148.252:5060 [Accounting disabled]
28/12/2009 10:40:52 AM - TekSIP Service is started on : 66.38.148.252:5060
SIP req. from : 70.35.30.90:9000 (UDP) - 12/28/2009 10:40:54 AM
REGISTER sip:66.38.148.252 SIP/2.0
[Via] = SIP/2.0/UDP 70.35.30.90:9000;branch=z9hG4bK-e86f30a0
[From] = 4034572699 <sip:la93?*85CY@66.38.148.252>;tag=211b73f21814d56o0
[To] = 4034572699 <sip:la93?*85CY@66.38.148.252>
[Call-ID] = 3bfd87fa-525fbb3a@70.35.30.90
[CSeq] = 8565 REGISTER
[Max-Forwards] = 70
[Contact] = 4034572699 <sip:la93?*85CY@70.35.30.90:9000>;expires=3600
[User-Agent] = Linksys/SPA2102-5.2.3
[Content-Length] = 0
[Allow] = ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
[Supported] = x-sipura, replaces
SIP req. to : 70.35.30.90:9000 (UDP) - 12/28/2009 10:40:54 AM
SIP/2.0 400 Invalid Request
Via: SIP/2.0/UDP 70.35.30.90:9000;branch=z9hG4bK-e86f30a0;received=70.35.30.90
From: 4034572699 <sip:la93?*85CY@66.38.148.252>;tag=211b73f21814d56o0
To: 4034572699 <sip:la93?*85CY@66.38.148.252>
Call-ID: 3bfd87fa-525fbb3a@70.35.30.90
CSeq: 8565 REGISTER
Server: TekSIP/2.3
Content-Length: 0
12/28/2009 10:40:54 AM - Debug Message:
Index was outside the bounds of the array.
SIP req. to : :0 (UDP) - 12/28/2009 10:40:54 AM
SIP/2.0 503 Internal Server Error
12/28/2009 10:41:08 AM - Debug Message:
Is there something i did wrong? Is there something wrong with the configuration of either my ATA or TekSIP?
Thanks
|
|
0
• permalink
|
29.12.2009 11:21:30
Admin
Administrator
Posts: 254
|
Hi,
TekSIP does not allow using * or ? characters in address of records (in From, To and Contact headers). Please download and try latest
build from TekSIP web site.
Best regards,
Yasin KAPLAN
|
|
0
• permalink
|
30.12.2009 04:15:33
CanSipUser
Posts: 3
|
Hello,
Thanks. I have spent hours pouring over the manual and trying to figure out my error. Does the latest build allow those characters * and ? that you mentioned?
Thanks again.
|
|
0
• permalink
|
30.12.2009 10:19:18
Admin
Administrator
Posts: 254
|
Hi,
I'll handle * character in next release but unfortunaltey ? character will take some time.
Best regards,
Yasin KAPLAN
|
|
0
• permalink
|
02.08.2010 09:19:14
CanSipUser
Posts: 3
|
Hello Admin. Im just wondering if the latest build can now handle the * and ? characters. Thanks you
|
|
0
• permalink
|
02.08.2010 11:36:40
Admin
Administrator
Posts: 254
|
Hi,
Latest version of TekSIP supports * character in address of records (in From, To and Contact headers). There is no support for "?" yet.
Best regards,
Yasin KAPLAN
|
|
0
• permalink
|