TekSIP Forum

15.11.2009 20:56:37 highcalibertech Posts: 1	Here's my setup & my problem. I have an Airlink ar525w router/firewall and 2 polycom ip500 sip phones behind this router. They are both registered using their own individual sub-accounts with seperate DID's thru my sip termination provider & they can make outbound calls just fine, but only one can receive inbound calls (which ever one I forward sip/rtp ports to) because the cheap firewall only will allow me to forward sip ports to 1 internal ip address. (I know I can probably flash the firewall to dd-wrt or tomato, but I really would like a solution where I don't have to do that) I would like to know if I can tell my firewall to forward sip (port 5060) & rtp ports (ports 10001-20000) to an Windows XP Pro box with TekSip installed & then have TekSip route the inbound calls to the appropriate sip phone, so I can then receive inbound calls on either phone, instead of only one & have outbound calls route as normal. I'm fairly new to sip, voip, and TekSip, so any help would be appreciated. Please let me know if this is something that can be accomplished using TekSip and if not, can you point me in the right direction. Thanks
	0 • permalink
16.11.2009 13:42:40 Admin Administrator Posts: 254	Hi, You can use more than one provider account for outgoing calls. But TekSIP does not supports more than one provider account for incoming calls. Best regards, Yasin KAPLAN
	0 • permalink

---